Reinforcement
Al-A’Ali Reinforcement is a division of Ahmed Mansoor Al-A’Ali Group, which is one of the leading and most successful business groups operating in the Kingdom of Bahrain for over five decades. As a nationally renowned steel reinforcement company with extensive experience in the local market, we deliver world class solutions tailored to client’s specific needs. We supply only the highest-grade steel reinforcement products needed for any building project. Efficiency and enhancing technology has always been the basic principle for the group’s development.
Launched in the year 2003, Al-A’Ali Reinforcement today is the largest Cut and Bend Rebar factory in the region. Since its commencement and over the past 15 years, Al-A’Ali Reinforcement has established itself as the preferred source for the supply of Steel Reinforcement by the leading contractors in the Construction Industry who demand consistency in quality of products and services.
In our effort to pursue innovation and excellence, providing quality products at economic prices, and meeting customer requirements, the company underwent massive expansion in the year 2005 which included the commissioning of a highly sophisticated Welded Wire Mesh plant. The factory is located at the AMA industrial site in Ras Zuwaid with a factory area of 8,100 square meters, and with a production capacity of over 10,000 tons a month.
Launched in the year 2003, Al-A’Ali Reinforcement today is the largest Cut and Bend Rebar factory in the region. Since its commencement and over the past 15 years, Al-A’Ali Reinforcement has established itself as the preferred source for the supply of Steel Reinforcement by the leading contractors in the Construction Industry who demand consistency in quality of products and services.
- Benefits of Cut & Bend Reinforcement
- No wastage of steel for the clients
- Reduced inventory on sites, resulting in less storage space and avoiding rust associated problems
- Rebars are cut & bent to exact specifications, ensuring precision and consistency
- No cutting and bending facilities required, thereby cutting down the extra manpower requirement at site
- Steel is produced and tagged to exact specifications for faster and simpler on-site installation
- Nil exposure to human errors at site – higher level of quality control
- Better accountability and traceability of materials
- Delivery of any quantity at site when required
- Our Products
Our Factory is built over 8100 square meters and is equipped with automatic production lines from Europe comprising of state of the art machinery that allow us to cut, bend and premanufacture rebar to your exact requirements while meeting industry standards. All our reinforcement steel is CARES approved and manufactured to British Standards BS 8666/ BS 4466, ensuring the highest standards of material and production quality. The product ranges from 8 mm to 40 mm for cut & bend rebars and 8 mm to 16 mm for rebar in coils.
List of our current machine manufacturers:
- Stema Pedax – Germany, Denmark
- EVG – Austria
- Schnell – Italy
- OSCAM – Italy
- STREET – England
Our experienced crew also install reinforcement steel on site according to customer requirements and blueprints.
We are one of the leading stockists and suppliers of Reinforcement steel bars on the island, delivering a diverse range of reinforcement products to the civil, commercial, residential, and industrial construction projects. We supply a wide variety of rebar sizes, grades, and finishes including epoxy coated rebars. Our extensive network of well-established suppliers from around the world enable us to meet specific customer requirements and guarantee prompt deliveries.
All our Reinforcement steel deformed bars are conforming to BS4449 Grade 500B or ASTM A615 Grade 60.
The Cold Rolled wire conforming to BS 4482 is used for production of Welded wire mesh. The Wire Mesh plant is equipped with machines with a high level of technological sophistication from EVG, Austria. The machine is fully automatic and is capable of producing welded wire mesh in various sizes and types at a speed as high as 6 sheets per minute. It has a production capacity of over 100 Tons per day with minimal human intervention. Samples are taken from each batch to ensure quality of welding.
The Wire Mesh production conforms to BS 4483 standard for steel fabric for reinforcement of concrete.
Al-A’Ali Reinforcement in the pursuit of innovation and excellence has moved on a step further to success and recognition with the advent of the new Wire Mesh plant. The Wire Mesh factory is equipped with the most advanced fully automatic machinery, the most sophisticated and the largest in the Middle East in terms of capacity. Every stage of production is done under the supervision of highly qualified and technically experienced personnel with scientific production procedures under strict Quality Control system.
The production line is facilitated with two Cold Rolling lines from TEUREMA, Spain and a Wire Mesh Welder from EVG, Austria and two overhead cranes of 10 Ton capacity each to facilitate uninterrupted production.
Al-A’Ali Reinforcement is equipped with a standard threading machine from Dextra Manufacturing, Thailand, which is capable of making threaded bars for mechanical splicing. The parallel threading process is realized through a three step manufacturing process namely Cutting, Cold Forging, and Threading.
Al-A’Ali Reinforcement is a supplier of BARTEC Mechanical Splices (Couplers), used for connecting concrete rebars and is an alternative to lap splicing.
- Our Services
Steel Fixing
At Al-A’Ali Reinforcement, we are totally committed to achieving and maintaining the highest standards of quality in every area of operation from receiving the order to the delivery and fixing on-site. With this vision we have our own in-house Quality Plan and certified with ISO 9001:2015 by TUV CERT Certification body for Quality Management System of RWTUV Systems GmbH (Germany). We have Six-Step approach towards achieving our quality plan.
Quality Control and Assurance
At Al-A’Ali Reinforcement, we are totally committed to achieving and maintaining the highest standards of quality in every area of operation from receiving the order to the delivery and fixing on-site. With this vision we have our own in-house Quality Plan and certified with ISO 9001:2015 by TUV CERT Certification body for Quality Management System of RWTUV Systems GmbH (Germany). We have Six-Step approach towards achieving our quality plan.
In-House Testing Laboratory
To further ensure the quality of material we supply, in house tests of mechanical properties are conducted at regular intervals at our material testing laboratory. Our laboratory is equipped with the latest SATEC Series Static Hydraulic Universal Testing Machine from INSTRON, USA.
Warehousing
Al-A’Ali Reinforcement has a separate warehouse with an area of 4000 square meters capable of stocking 30,000 Tons of steel under cover and also has a dedicated 50 T capacity goliath crane that enables the transfer of materials from the warehouse to the production plant.
GPS
We have the GPS set-up for tracking timely deliveries to customers, and work effectiveness. We deliver and focus on our values of customer service.
Sales and Marketing
The Sales and Marketing department pursues a number of management objectives and strategies, most importantly carrying Al-A’Ali Reinforcement as a reputable, quality conscious and reliable supplier of Reinforcement Steel for the construction industry in Bahrain.
As part of the relentless effort to achieve the objectives, our Sales department continuously communicates with our potential customers and also maintains a very high quality of service. Meeting customer requirements and rigorous quality control practices is at the foundation of the entire operation.
Logistics and Delivery
Al-A’Ali Reinforcement with its own fleet of trucks and trailers has the capacity to deliver materials as per customer requirements round the clock. All the vehicles are fitted with cranes for easier and faster offloading at site and our drivers have 3rd party accredited offloading certification to ensure your delivery is offloaded safely. All dispatches are well planned and programmed to suit every customer’s needs. No matter how large or small any building project is, delivery on time is vitally important. Over 90% of our deliveries are made within 48 hours of the order being placed.
Customisation
Any other non-standard size also can be made based on specific requirements of the customer.